All the shocks I have feel that way.
Bushing Technology Inspection Seals Foam Rings Control Direction Oil Volumes Structural Inspection Dropout update driver for ati radeon hd 4200 Thickness Inspection Torque Values Unit Conversion Suspension Tuning Tips Using the Pump Important Safety Information Service Intervals Contact FOX Service Warranty Information foxhelp Service Web Site Copyright 2011 FOX Factory Inc.
The ProPedal knob clicks twice per setting as it turns.
If this residual air sleeve lubricant is not present, this is an indication that the air sleeve should be re-lubricated.
Do not use a high pressure washer to clean your shock.The three ProPedal knob settings are: (1) propedal Light (2) propedal Medium (3) propedal Firm To panasonic lumix dmc-tz10 user manual adjust the ProPedal knob: Turn the ProPedal lever to the propedal position.You are here: Rear Shocks float float RP23, installing Your Shock, general Maintenance.If you click it and it kinda falls away from your finger, that's the most open compression setting.The rebound knob has 8-10 clicks of adjustment.Internal service should be performed by FOX Racing Shox.You will tune to a more specific air pressure in the.Test the proper operation of your front and rear brakes on level ground.
Fox, Rockshox, Manitou, XFusion.
Remove the main air chamber air cap and let all the air out of the main air chamber.
Check your headset adjustment.
The first click occurs as you exit the current setting; the second click as you engage the new setting.
Check that all brake cables or hoses are properly fastened.For slower rebound, turn the red adjuster knob clockwise.The ProPedal knob only changes damping when the ProPedal lever is in the propedal position.Do not spray water directly on the seal/shock body junction.Caution: For safety reasons, the ProPedal knob setting should only be changed when you're not riding the bicycle.Important Safety Information features/adjustments high volume standard air sleeve, boost valve, angled air valve, lightweight chassis, dohc ProPedal lever with 2 positions, ProPedal tuning range adjuster with 3 positions, air spring pressure, rebound adjust spring air intended gmc 302 inline 6 shop manual use freeride, all-mountain, cross-country, installing Your Shock,.If necessary, measure and set sag again and repeat this adjustment.Inspect the entire exterior of your shock.ProPedal ProPedal Lever The ProPedal lever allows for on-the-fly ProPedal adjustment.The proper rebound setting is a personal preference, and changes with rider weight, riding style and conditions.Setting Sag To set sag: Measure and set sag, and compare your result to the sag setting shown in the Air Spring Setting Guidelines table below.Check that all parts of the shock are clear of the frame and swingarm as it cycles through the travel.